Tout pour votre Micro5 en un seul endroit

de stock, compatible, et au même prix qu'en direct! 

  • favorites
  • Training
  • Holders
  • Cutting tools
  • Palletizing and clamping
  • Presetting
  • Consumable
  • Smartools
  • Retrofit
Formation UGV
1 jour de formation
Maximum 4 participants
Sur votre site ou dans nos locaux Chiron Swiss

Programme
- Qu'est-ce que l'UGV?
- Fréquences propres et résonance
- La vallée de la mort
- Vitesse bord outils / centre outil
- Exploiter le capteur de vibration IFM
- Choix des outils coupants
- Choix des tasseaux
- Choix du posage et usinage de la contre-forme
- Choix des paramètres de coupe
- Choix des stratégies
Over-under clamping actuated tray 50x50mm with sealing
jaws and sub-plate included with purchase of sus-sous
Set of jaws 50x50 (019 016) included in delivery
Yerly 32P low unhardened steel tongs for ball centering - Ø40mm/h32mm/4 slots
Ø40mm - h32mm
Number of slots: 4
Center hole: 2
Flange height: 11mm
Opening or closing by screw-in push-button from rear or by connected push-button, version with sealed interior
Yerly 32P unhardened steel tongs for ball centering Ø50mm/h32mm/4 slots
Ø50mm - h32mm
Number of slots: 4
Central hole: 2
Flange height: 11mm
Opening or closing by screw-in push-button from rear or by connected push-button, version with sealed interior
Colletholder HSK-AZ15-MEGA3S-25 (indexed), with clamping nut - BIG KAISER
BIG KAISER - Indexed Colletholder for micro machining
ATC-A15-MEGA3S-25
Maximum limit of 80'000 rpm
Collet Chuck HSK-EZ15-MEGA3S-25, with clamping nut - BIG KAISER
Clamping range 0.45 to 3.25 mm.
Recommended tightening torque with MEGA torque wrench
Maximum limit of 80'000 rpm
Torque wrench MEGA3S-25 - BIG KAISER
For MEGA Micro Chuck
With trigger once torque is reached
Ød : 10
Collet Chuck HSK-EZ15-MEGA4S-28, with clamping nut - BIG KAISER
Clamping range 0.45 to 4.05 mm.
Recommended tightening torque with MEGA torque wrench
Maximum limit of 80'000 rpm
Torque wrench MEGA4S-28 - BIG KAISER
For MEGA Micro Chuck
With trigger once torque is reached
Ød : 12
Micro-machining tool holder with clamping nut - HSK-AZ 15 / ERMS 8 x 021 (indexed)
REGO-FIX indexed Colletholder for micro machining
HSK-AZ 15 / ERMS 8 x 021
Micro-machining tool holder with clamping nut - HSK-AZ 15 / ERMS 11 x 024 (indexed)
REGO-FIX indexed Colletholder for micro machining
HSK-AZ 15 / ERMS 11 x 024
Colletholder for micro machining ATC-E 15 / SR 6 x 022 with clamping nut, balanced to 80'000 min-1 - REGO-FIX
REGO-FIX Colletholder for micro machining with clamping nut, balanced to 80'000 min-1
ATC-E 15 / SR 6 x 022
Tray 50x50mm_material CuZn39Pb2.0
Brass tray 50x50mm with 4 holes
Material CuZn39Pb2.0