The Micro5 can be transported over short distances (e.g. to another location in the factory) using a simplified procedure, provided the following conditions are met:

• Over short distances 

• Only inside buildings

• The ground must be dry, smooth and flat without slopes or banks

• The Micro5 must not have any external accessories (ventilation, workbench) or internal accessories (tool holder disk, gripper, probe, etc.)
  

• The various liquids must have been drained (oils)

• Networks must be disconnected (electrical, pneumatic, LAN, etc.)
  

• Doors must be closed and locked.

A standard or short fork pallet truck can be used, entering under the machine and perpendicular to the workbench.

--> Take care not to collide with the feet of the machine to avoid damage to the threads on the feet.

We strongly recommend that the operation be performed with 2 people and the movements coordinated.

If the moving operation does not meet the above conditions or involves loading into a vehicle, the procedure described on this page should not be used. To transport the machine over long distances, use the transport procedure (link).