On the Micro5 series 0 and 1 (up to SN/002024), the rear part of the machine consists of 2 removable parts.

From series 2 (SN/002025 onwards), the rear part is equipped with a movable cover that opens upwards, see article:

• Opening the rear cover

Prerequisites

1. The system must be powered down  

2. Prevent the system from being restarted 

Procedure

Disassembly

Rear part of the machine

1. Unlock the 2 right-hand locks..

2. Hold the cover horizontally and push it upwards 

3. Detach the cover from the retaining screws on its left side

4. Remove the cover

5. 
   

If it is necessary to have more opening or more clearance towards the top, it is also possible to remove the upper part of the cover.

Assembly

Rear part of the machine

1. Offer up the cover in its position.

2. Engage the cover fasteners in the retaining screws on its left side.

3. Keep the cover horizontal and push it down.

4. Visually check that the fasteners are pushed in behind the retaining screws..

5. Lock the 2 right-hand locks..

6. Make sure the cover is locked and properly in place..