- Uncategorized
- Precautions
- general maintenance
-
replacement procedures
-
Cleaning the machining area
-
Opening the rear cover
-
Removing the top cover
-
Opening the rear cover
-
Replacing the microlubrication nozzle
-
SCARA maintenance
-
Replacement of the spindle
-
Spindle height adjustment
-
Cleaning filters
-
Adjusting the tool holder disk collet sensors
-
Axis frequency response measurement
-
PLC+HMI program backup
-
Sauvegarde fichiers Micro5 / Feed5
-
NE PAS PUBLIER - Templates & samples
-
Changing the interface language
-
- Calibration
- Dépannage
Service parts
Inspection intervals and service parts
Inspection frequency
The inspection intervals are defined for critical components and the following recommendations apply for average use under optimum conditions:
- 250 hours ≃ Monthly maintenance
- 2000 hours ≃ Annual maintenance
- 6000 hours ≃ Every 30 months
- 12,000 hours ≃ Every 5 years
These values are given for information only and may vary. Taking into account the installation and usage conditions allows for a more accurate estimate of the optimal inspection frequency.
Maintenance activity
The maintenance activities determine the component checking method:
- Visual inspection = check of the component's condition (measurement, appearance, condition, etc.), with or without disassembly.
- Functional test = check of the component's condition based on its operation, with or without disassembly.
- Replacement = Systematic exchange of the component at the defined interval.
Views | |
---|---|
70 | Total Views |
68 | Members Views |
385 | Public Views |
Actions | |
---|---|
0 | Likes |
0 | Dislikes |
0 | Comments |
Share by mail
Please login to share this webpage by email.