Home └Maintenance └Removing the top cover

Maintenance

0 %

Completed

Course content

Removing the top cover

Prev Next
Fullscreen Share

Removing the top cover

On the Micro5 series 0 and 1 (up to SN/002024), the rear part of the machine consists of 2 removable parts.

From series 2 (SN/002025 onwards), the rear part is equipped with a movable cover that opens upwards, see article:

Prerequisites

  1. The system must be powered down 

  2. Prevent the system from being restarted 

  3. The rear cover must have been removed.  (V/procedure)

Procedure

Disassembly

Rear part of the machine

  1. Remove the fan

    1. Rotate the fan counterclockwise

    2. OR Disconnect the fan from its power cable

  2. Dismantle the equipotential bonding

  3. Remove all screws around the cover

  4. Remove the cover

Assembly

Rear part of the machine

  1. Offer up the cover in its position

  2. Install the fastening screws around the edge of the cover

  3. Mount the equipotential bonding

  4. Mount the fan

Odoo • Image et Texte

Removing the rear cover

On the Micro5 series 0 and 1 (up to SN/002024), the rear part of the machine consists of 2 removable parts.

In general, always turn off all power before opening the hood

Prevent power supply risk (Lock-out)

Odoo • Image et Texte

Risk of crushing

The rear part has moving parts. The machine starts automatically. The paths, speed and mass of the moving parts present a danger of serious injury. The opening of the rear cover must be done by trained personnel and only after a complete risk analysis.

In general, always turn off all power before opening the hood

Prevent power supply risk (Lock-out)

Rating
0 0

There are no comments for now.