Removing the top cover
Removing the top cover
On the Micro5 series 0 and 1 (up to SN/002024), the rear part of the machine consists of 2 removable parts.
From series 2 (SN/002025 onwards), the rear part is equipped with a movable cover that opens upwards, see article:
Prerequisites
The system must be powered down
Prevent the system from being restarted
The rear cover must have been removed. (V/procedure)
Procedure
Disassembly
Rear part of the machine
Remove the fan
Rotate the fan counterclockwise
OR Disconnect the fan from its power cable
Dismantle the equipotential bonding
Remove all screws around the cover
Remove the cover
Assembly
Rear part of the machine
Offer up the cover in its position
Install the fastening screws around the edge of the cover
Mount the equipotential bonding
Mount the fan
Removing the rear cover
On the Micro5 series 0 and 1 (up to SN/002024), the rear part of the machine consists of 2 removable parts.
In general, always turn off all power before opening the hood
Prevent power supply risk (Lock-out)
Risk of crushing
The rear part has moving parts. The machine starts automatically. The paths, speed and mass of the moving parts present a danger of serious injury. The opening of the rear cover must be done by trained personnel and only after a complete risk analysis.
In general, always turn off all power before opening the hood
Prevent power supply risk (Lock-out)
| Views | |
|---|---|
| 56 | Total Views |
| 53 | Members Views |
| 377 | Public Views |
| Actions | |
|---|---|
| 0 | Likes |
| 0 | Dislikes |
| 0 | Comments |