Home └Manual └Operation in manual mode

Manual

0 %

Completed

Course content

Operation in manual mode

Prev Next
Fullscreen Share

Operation in manual mode

Odoo • Image et Texte

Manual mode allows the CNC to be controlled completely manually


Remarks:

  • Manual mode works with or without the wire control..

  • The default original offset is in G53.

  • The drop-down menu allows you to select a specific offset.

  • Tool selection is only possible by first switching to MDI mode (11)

 Odoo • une photo avec une légende

Spindle start and stop

Enter the desired frequency in field 1, confirm with enter and switch on with the start button on the right (not shown in the image).

Moving the axes

Select an axis with the switch of the wire control, select a movement increment and move the axis with the pulse buttons or the rotary wheel.

Wired control

  1. Emergency stop

  2. Selection of the axis

  3. Selection of the pulse granularity

  4. Pulse button

  5. Assent button

  6. Rotating wheel

Odoo • Texte et Image

Remark: The wire control system includes an emergency stop. If it is not plugged in, the machine cannot operate! To use the machine without a wired remote control, you must connect the plug to the socket.

Rating
0 0

There are no comments for now.