VolumeMax

Maximum blank dimensions

Prerequisites

The following indications are valid under the conditions shown below:

• Using a standard 12 mm thick pallet [Micro5 roughing pallet]

• Use of a 22.5 mm shrink fit tool with a 7 mm tool height

Using a different type of setting or a tool which is mounted or set differently will impact the maximum dimensions of the blank.

The machining mode (3 or 5 axes) also affects the maximum dimensions of the blank.

Other points to consider

• The cutting length of the tool and the size of the tool holder limit the depth that can be reached, depending on the geometry of the part.
  

• The specific clamping methods (collets with plates, vises, etc.) or active clamping (over-under fixtures, Ottet collets, etc.) impose their own constraints on the nominal dimensions of the blank part.